Hybrid Printing Process
INTRODUCTION
The printing for hybrid circuits is a fundamental process in which the conductors, resistors and overglaze are put onto a ceramic tile called a substrate. While conductors, resistors and overglaze are not printed at the same time, the process is the same. Thus it is very important that anyone who is in the microelectronics field should know the basic process. While the process may change, depending on technology used, the same basic principles will …
Is this Essay helpful? Join now to read this particular paper
and access over 480,000 just like this GET BETTER GRADES
and access over 480,000 just like this GET BETTER GRADES
…substrates are sent to the dryer and then finally to the furnace where excess materials and impurities are burnt off.
CONCLUSION
As you can see the printing process has a three major steps. Step one, setup. Step two; actually print the paste through the screen onto the substrate. Step three; fire the result substrate through the dyer and furnace.
REFERENCES
Diagrams modified from class notes, from Micro Electronics.
Johanson-caps.com
Koaspeer.com
www.avxcorp.com
Need a custom written paper? Let our professional writers save your time.